Electrical specifications
WARNING!
Power requirements are based on the country/region where the printer is sold. Do not
convert operating voltages. Doing so might damage the printer and void the product warranty.
HP LaserJet 1160 printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (20 ppm): 340 watts (average)
●
During Ready (Standby) and PowerSave*:
4 Watts
* Instant on fuser technology
●
Off: <1 watts
Minimum recommended circuit capacity for
typical product
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
HP LaserJet 1320 printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 340 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
●
Off: <1 watts
Minimum recommended circuit capacity for
typical product
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
HP LaserJet 1320n printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 345 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
●
Off: <1 watts
Minimum recommended circuit capacity for
typical product
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
126
Appendix A Printer specifications
ENWW
HP LaserJet 1320nw printer
Power requirements (110)
110-127v (+/-10%), 50/60 Hz (+/-2)
Power requirements (220)
220v-240v (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 345 watts (average)
●
During Ready (Standby) and PowerSave*:
6 Watts
* Instant on fuser technology
●
Off: <1 watts
Minimum recommended circuit capacity for
typical product
●
4.5 amps at 115 volts
●
2.6 amps at 230 volts
Note
Values are current as of April 1, 2004. Values are subject to change without notice. See
http://www.hp.com/support/lj1160/
or
http://www.hp.com/support/lj1320/
for current
information.
Note
The power reported is the highest value measured for monochrome printing using all
standard voltages.
Note
The default time from Ready mode to PowerSave mode and the recovery time from
PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the
instant on fusing.
Note
The heat dissipation in Ready mode is 20 BTU/hour.
ENWW
Electrical specifications
127