Installing a memory DIMM (HP LaserJet 1320 series printer
only)
If you add memory (RAM only) to the HP LaserJet 1320 series printer, you can print more
complex print jobs.
To install a DIMM, follow the instructions below:
CAUTION
Handling a DIMM (memory) without wearing a grounded, antistatic device might damage the
DIMM. Touch any metal part of the printer or other grounded metal before touching the DIMM.
1. Turn off the power switch, and unplug all of the cables connected to the printer.
2. Open the print cartridge door. To open the left side panel, gently pull it out.
ENWW
DIMMs (memory or font)
155
3. Locate the DIMM slot. The cam latches, located at the top and bottom, should rotate
outward.
4. Remove the DIMM from the antistatic bag it came in, grasping the DIMM on the top edge.
5. Position the DIMM on the right side of the circuit board. The gold contacts should be
pointing left and the cutouts should be at the top left and center left.
156
Appendix D HP parts and accessories
ENWW
6. Carefully press the DIMM into the slot, making sure that it is straight and all the way in.
The cam latches, located at the top and bottom, should rotate inward. To snap the cam
latches into place, press the handles toward each other.
7. Close the left side panel and the print cartridge door.
8. Plug the printer back in, and turn on the power switch.
ENWW
DIMMs (memory or font)
157