Automatic two-sided printing (duplexing) path
To clear a jam in the automatic two-sided path, perform the following steps:
CAUTION
Do not use sharp objects, such as tweezers or needlenose pliers, to remove jams. Damage
caused by sharp objects will not be covered by the warranty.
1. Open the straight-through output door.
2. Rotate the green pressure release levers downward.
116
Chapter 6 Problemsolving
ENWW
3. Remove the main input tray (Tray 2).
4. Push down on the green lever on the automatic two-sided path door on the front of the
printer.
5. With both hands, grasp the side of the media that is most visible (this includes the
middle), and carefully pull it free from the printer.
ENWW
Clearing jams
117
6. Close the automatic two-sided path door.
7. Reinsert the main input tray (Tray 2).
8. Open the automatic two-sided path door on the back of the printer.
118
Chapter 6 Problemsolving
ENWW
9. With both hands, grasp the side of the media that is most visible (this includes the
middle), and carefully pull it free from the printer.
10. Close the automatic two-sided path door.
ENWW
Clearing jams
119