Status light patterns
Light status legend
Symbol for "light off"
Symbol for "light on"
Symbol for "light blinking"
Control panel light message
Light status
State of the printer
Action
Initialization/Startup
While in the Startup state, the
Go, Ready, and Attention lights
cycle (at the rate of 500 ms)
one after another.
During the Initialization
process, pressing buttons has
no effect.
ENWW
Status light patterns
87
Light status
State of the printer
Action
Reconfiguration Initialization
During the printer start up, you
can request special
initialization sequences that
reconfigure the printer. When
one of the sequences is
requested, such as Cold Reset,
the lights cycle as in the
Initialization/Startup state.
During the Reconfiguration
process, pressing buttons has
no effect.
Ready
The printer is ready with no job
activity.
To print a Configuration page,
press and hold the
G
O
button
for 5 seconds.
To print a Demo page, press
and release the
G
O
button.
Processing Data
The printer is processing or
receiving data.
To cancel the current job, press
the
C
ANCEL
button.
Control panel light message (continued)
88
Chapter 6 Problemsolving
ENWW
Light status
State of the printer
Action
Job Cancel
Pressing the
G
O
button has no
effect.
Once the cancellation process
has been completed, the
printer returns to the Ready
state.
Manual Feed or Continuable
Error
This state can be reached in
the following circumstances:
●
Manual feed
●
Out of paper for the
specified tray
●
General continuable error
●
Memory configuration error
●
Personality/Job related
error
To recover from the error and
print whatever data is possible,
press the
G
O
button.
If the recovery is successful,
the printer goes to the
Processing Data state and
completes the job.
If the recovery is unsuccessful,
the printer returns to the
Continuable Error state.
Attention
This state can be reached in
the following circumstances:
●
Paper tray is empty
●
Door open
●
Paper jam
●
Misfeed from tray
To reset the printer after a jam,
press the
G
O
button.
You might need to clear the
error manually, and press the
G
O
button or close the top cover.
If the error persists, the printer
returns to the Attention state.
Control panel light message (continued)
ENWW
Status light patterns
89
Light status
State of the printer
Action
Fatal Error
●
Turn off the printer, wait 10
seconds, and turn on the
printer.
●
If you are unable to
resolve the problem,
Contact HP support
.
Accessory Error
(HP LaserJet 1320 series
printer only)
To display additional error
information, press the Go
button. The light pattern
changes. For more information
about the light pattern now
displayed, see
Accessory error
indicators
. When you release
the Go button, the printer
returns to the initial Accessory
Error state.
Cleaning Page
The cleaning page feature is
not available through the
control panel. The cleaning
page can be activated using
the HP Toolbox, which is
included as part of the overall
printer software package.
During cleaning mode,
pressing buttons has no effect.
The printer motor slows down
and the printer prints a page.
Control panel light message (continued)
90
Chapter 6 Problemsolving
ENWW
Light status
State of the printer
Action
Toner Low
The Go, Ready, and Attention
lights act independently of the
Toner Low state.
Insert a new print cartridge.
Toner Missing
The print cartridge has been
removed from the printer.
Reinsert the print cartridge in
the printer.
Wireless Connection
Established
The Go, Ready, Attention, and
Toner lights act independently
of the Wireless light.
No action is necessary.
Control panel light message (continued)
ENWW
Status light patterns
91
Light status
State of the printer
Action
Wireless Disabled
The Go, Ready, Attention, and
Toner lights act independently
of the Wireless light.
No action is necessary.
Attempting to Establish
Wireless Connection
The Wireless light blinks at one-
half second intervals.
The Go, Ready, Attention, and
Toner lights act independently
of the Wireless light.
No action is necessary.
Return to
Finding the solution
.
Accessory error indicators
Accessory error
Attention light
Ready light
Go light
Internal HP Jetdirect
error
On
Off
Off
DIMM slot
incompatible error
Off
Off
On
Control panel light message (continued)
92
Chapter 6 Problemsolving
ENWW